Need help?Do you have a question about the Vicon Fanex 523 T and is the answer not in the manual?
General| Brand | Vicon |
|---|---|
| Model | Fanex 523 T |
| Category | Farm Equipment |
| Language | English |
General safety advice and importance of following instructions for safe operation of the implement.
Explanation of safety alert signs (Danger, Attention, Note) and their meanings for user safety.
Details about the machine's nameplate, including type and serial number location.
Defines the intended agricultural use of the Rotary Tedder and risks of misuse.
Outlines user responsibilities regarding operating instructions, regulations, and warranty conditions.
Highlights the importance of understanding safety labels and pictorial warnings for accident prevention.
Specifies age restrictions and responsibilities for individuals operating the Rotary Tedder.
Covers fundamental safety checks, operator clothing, cleanliness, and road travel precautions.
General safety rules for operating the implement, including familiarization with controls and protective equipment.
Specific safety precautions related to coupling and working with trailed implements.
Critical safety procedures for operating the PTO shaft and ensuring proper guarding and engagement.
Safety guidelines for working with the hydraulic system, including pressure, hoses, and oil handling.
Safety considerations for tyre maintenance, installation, and checking inflation pressure.
Guidelines for safe storage, including securing the implement and preventing unauthorized access.
Essential safety measures to be taken before performing any maintenance or servicing tasks.
Specific safety advice tailored for the operation and handling of the Rotary Tedder.
Requirements for road travel, including lighting, marking, and speed regulations.
Provides key technical specifications of the Fanex 523 T, including dimensions, weight, and PTO requirements.
Presents sound pressure level measurements for the tractor and the tractor with the Rotary Tedder.
Step-by-step instructions for attaching the rotary hay maker to the tractor linkage and drawbar.
Guidance on adjusting the PTO drive shaft length for compatibility with different tractors.
Procedure for safely collapsing the machine for transport, ensuring engine off.
Procedure for safely unfolding the machine into working position, checking swivel area.
Instructions for adjusting tine height and rotary tilt for optimal ground contact.
Describes how to adjust rotary tilt using the adjustment crank and tine height via the drawbar.
Explains the automatic leaning of side machines and spindle adjustment for tine distance.
Guidance on selecting travel speed, PTO speed, and tractor control unit settings for various tasks.
Detailed steps for safely detaching the implement from the tractor, including prop stand deployment.
Procedure for checking and adjusting tine setting using stopper screws and torque specifications.
Information on changing wheels, tightening wheel nuts, and checking tyre pressure.
Instructions for initial inspection after 5 operating hours, tightening screws, and specific torque values.
Details on lubrication intervals, type of grease, and specific lubrication points on the machine.
Information on the quantity and type of hydraulic oil required for the hydraulic hand pump.
Instructions for mounting and using the swathe gear for raking operations.
Description of the flexible tine holders that prevent tines from getting lost if they break.
Explanation of fitting tandem axles to minimize ground pressure and improve running characteristics.
Information on road traffic regulations requiring warning signs and lighting for agricultural equipment.
Details on the hydraulic hand pump for tractors without hydraulic pack to control side machines.
Table of recommended torque values for various metric thread sizes and material qualities.
To Next Page
