Victor 03 User Manual

4
Warning
Warning
Warning
Warning

The power supply connected to the calibrator must be shut
down and then the test leads need removing prior to replacing
the battery.
3.1
3.1
3.1
3.1
When
When
When
When
the
the
the
the
symbol
symbol
symbol
symbol
appears
appears
appears
appears
in
in
in
in
the
the
the
the
display,
display,
display,
display,
it
it
it
it
denotes
denotes
denotes
denotes
that
that
that
that
the
the
the
the
battery
battery
battery
battery
is
is
is
is
nearly
nearly
nearly
nearly
used
used
used
used
up
up
up
up
and
and
and
and
needs
needs
needs
needs
replacing
replacing
replacing
replacing
according
according
according
according
to
to
to
to
the
the
the
the
following
following
following
following
steps:
steps:
steps:
steps:
1) Turn off the power switch of the calibrator and then remove
the test leads.
2) Remove the holster from the calibrator. Open the battery cover
at the back of the calibrator by releasing the lock in the indicated
direction.
3) Replace the used-up battery with a new one. Put the battery
cover back and lock it in the indicated direction.
4) Put the holster back onto the calibrator.
4.
4.
4.
4.
Power-On/Off
Power-On/Off
Power-On/Off
Power-On/Off
of
of
of
of
Calibrator
Calibrator
Calibrator
Calibrator
4.1
4.1
4.1
4.1
Power-key
Power-key
Power-key
Power-key
operation
operation
operation
operation
Press the power key to turn on the power supply of the calibrator. Then
press it again to hold it in one second and the power will be off. When
the power is turned on, the calibrator starts to make self-diagnosis
internally and the full screen is in displ ay. After this, appropriate
operation should be carried out.
N
N
N
N
ote
ote
ote
ote

P
P
P
P
ower-on
ower-on
ower-on
ower-on
: To ensure the correct operation of the calibrator with
power on, it is good practice to turn off the power
supply pausing 5 seconds, and then restart the
calibrator.
4.2
4.2
4.2
4.2
Automatic
Automatic
Automatic
Automatic
power-off
power-off
power-off
power-off
B y the shipping time, the calibrator setting is made in the factory like this
:In case there is no operation of the calibrator within 10 minutes after
power-on, it will cut off the power automatically. However, users can
decide whether they want to use the function of the automatic power-off

Victor 03 Specifications

General

Brand	Victor
Model	03
Category	Measuring Instruments
Language	English