77
• By pressing
, the display will read:
or
•
Press to modify the measures unit setted.
•
Press to confirm and pass to the next step.
•
Press
to return to the previous page without
confirming.
•
The display will read:
•
By pressing
key, the display will read:
•
With the
light blinking, select the value of
desired brightness choosing from a minimum value
of 1 to a maximum of 6 by using the keys.
•
Confirm by pressing
.
•
The temperature value blinks and
with
keys it is possible to set the lighting
from a minimum value of 1 to a maximum of 3.
•
Press
to confirm and pass to the next step.
•
Press
to return to the previous page without
confirming.
This allows to enter other special functions.
In BRIGHTNESS ADJUST. mode, hold down the 1 long
coffee
+ keys of the FIRST & SECOND group
for at least 3 sec to open the special menu.
Now the buttons are for:
(to exit hidden menu).
UP/DOWN (to change the parameters).
(to surf the hidden menu).
: with pump - no pump
( UP/DOWN to switch).
: 1 - 2 - 3
( UP/DOWN to switch).
: with pump - no pump
( UP/DOWN to switch).
: not active - active
( UP/DOWN to switch).
: -15 - 0 - +15 °C/F
( UP/DOWN to switch).
: -200 - 0 - +200 mbars
( UP/DOWN to switch).
: not active - active
( UP/DOWN to switch).
To Next Page
Loading...
Need help?
General
