Victoria Arduino Adonis+

49
ENGLISH
5. PROGRAMMING
5.1 KEY
Fig. 19
① LCD Display.
② RESET Key: to turn the machine on and
off and to exit menu
③ CURSOR Key: to scroll the menu and to
④ increase and decrease
values.
⑤ ENTER: To access the menu.
5.2 DISPLAY
(USER mode)
To enter the user mode display environment,
hold down the ENTER key for 8 seconds and
wait to hear the first acoustic signal.
The machine will read:
AUTO.CLEAN.CYCLE
AUTOMATIC CLEANING CYCLE:
• The display will show:
AUTO.CLEAN.CYCLE
• Press ENTER and the display will read:
AUTO.CLEAN.CYCLE
SELECT
• The central key in each unit will begin to
flash on and off. Insert the blind filter (Fig. 2)
into the filter-holder, add half a dose of
PULICAFF and attach the filter-holder into
the unit where you intend to carry out the
automatic cleaning cycle. Carrying out a
cleaning cycle in more than one unit at a
time is possible.
• Press the
key to start the unit automatic
cleaning cycle. The display will read:
AUTO.CLEAN.CYCLE
¡ L
Where 1L indicates that the cleaning cycle
has been activated within the 1st unit. Once
the cycle of 15 deliveries of 5 seconds each,
with a 10-sec-ond pause between each
delivery, has been completed the selected
unit
key will begin to flash on and off
again and the display will read:
RINSE
• Press the RESET key to view the next func-
tions or to quit the display mode.
DOSES:
• The display will read:
DOSES
• Press the ENTER key and all of the dose,
hot water and steam keys will start to flash.
• Pressing one of the flashing keys will show
the corresponding programmed setting on
the display.
•Press the▲ keyto returnto theprevious
function.
• Press the RESET key to quit the display
mode.
POURING COUNT
• The display will read:
DELIVERY COUNT
• Press the ENTER key and all of the dose,
hot water and steam keys will start to flash.
• Pressing one of the flashing keys will show
the corresponding counter on the display.
•Press the▲ keyto returnto theprevious
function.
• Press the RESET key to quit the display
mode.
LIST OF DISPLAY FUNCTIONS (USER
MODE):
AUTO CLEAN CYCLE
DOSES
POURING COUNT
TOTAL
MACHINE TOTAL
TOTAL WASHES
2 3 4 5
1