Victoria Arduino Adonis+

50
ENGLISH
TOTAL:
• The display will read:
TOTAL
• The short coffee key of each group will
flash and when pressed, the machine will
show the number of coffees poured with the
given group.
•Pressthe▲▼keystoviewtheotherfunc-
tions.
• Press the RESET key to quit the display
mode.
MACHINE TOTAL
• The display will read:
MACHINE TOTAL
DELIVE. xxx
•Pressthe▲▼keystoviewtheotherfunc-
tions.
• Press the RESET key to quit the display
mode.
WASH COUNT
• The display will read:
CLEANING COUNTER
• The long coffee key for each group will
flash and when pressed, the display will
show the number of wash cycles carried out
for that particular group.
•Pressthe▲▼keystoviewtheotherfunc-
tions.
• Press the RESET key to quit the display
mode.
5.3 PROGRAMMING
(TECHNICIAN Mode)
LIST OF PROGRAMMABLE FUNCTIONS:
(TECHNICIAN MODE):
AUTO.CLEAN.CYCLE
DOSE PROGRAM.
DELIVERY COUNT
ACTIVE UNITS *
ON-OFF PROGRAM.
ENERGY SAVING
SETPOINT TEMPERATURE (and OFFSET) *
CUP-WARMER PRO.
DATE/TIME
DISPLAY SETTING (and DELIVERING TIME) *
DELIVERING IN WASHING MODE
POURING TIME °
SETPOINT PRESS.
HISTORICAL ALARM
MAINTENANCE
WASH ALARM
LANGUAGE
TEMPERATURE
LIGHT ADJUST
Operation to be carried out EXCLUSIVELY
by a Qualified Technician. Adjustment by
qualified technicians can invalidate the guarantee .
* T3 version only
° Digit version only
To enter the Technician Mode programming envi-
ronment, hold down the ENTER key for at least 10
seconds and wait for the acoustic signal:
AUTO.CLEAN.CYCLE
followed by:
PROGRAM. DOSES
AUTOMATIC CLEANING CYCLE
• The display will read:
AUTO.CLEAN.CYCLE
• Press ENTER and the display will read:
AUTO.CLEAN.CYCLE
SELECT
• The central key in each unit will begin to
flash on and off. Insert the blind filter (Fig. 2)
into the filter-holder, add half a dose of
PULICAFF and attach the filter-holder into
the unit where you intend to carry out the
automatic cleaning cycle. It is possible to
wash more than one group at the same time.
• Press the
key to start the unit automatic
cleaning cycle. The display will read:
AUTO.CLEAN.CYCLE
¡ L
Where 1L indicates that the cleaning cycle
has been activated within the 1st unit. Once
the cycle of 15 deliveries of 5 seconds each,
with a 10-second pause between each deliv-