or to know the total number of coffees, with the possibility of zeroing the quantity;
or to know the number of times the motor has started.
Finally it is possible to count the grind times: the time the machine has continuously ground
coffee (can be zeroed);
is the total time in which the machine has been active (cannot be zeroed).
MAINTENANCE SETTING
MAINTENANCE ON
CHANGE. >
Pressing this key, it is possible to enable maintenance alarm.
Pressing this key, when the maintenance alarm is enabled, you enter maintenance
threshold and maintenance counter reset, otherwise you enter standard dose pro-
gramming.
SETTING OF MAINTENANCE THRESHOLD AND MAINTENANCE COUNTER RESET
- RES. + SET >
50000
The threshold value is increased or decremented from a minimum of 10000 to a maximum
of 100000 (every 1000) by means of and .
Pressing this key, the modification is confirmed.
Pressing this key, maintenance counter value is reset.
Pressing this key, you enter the standard dose programming.
TOTAL COUNT
ANUL. 00
>
START NUMBER
00
>
CONTINUOUS TIME
ANN. 0:00:00
>
GENERAòL TIME
0:00:00
>
To Next Page
Loading...
Need help?
General
