November 5, 2015 2/10
Setting the watch
Press the Victorinox emblem for 4 seconds
until the display flashes. Now release the Vic-
torinox emblem again. You have changed to
the time setting mode.
The arrow shows the current setting direc-
tion. The change takes place automatically.
If the Victorinox emblem is pressed for longer
than this (min. 6 seconds), the adjusting
speed is increased (20 digits/s).
C = continuous pressure min. 6 sec
Brief pressure on the Victorinox emblem al-
ters the display by one digit in the arrowed di-
rection.
If the button is not pressed within 10 sec-
onds, the setting mode is quit automatically
and the new display accepted.
Setting the time format
Press the Victorinox emblem for 8 seconds
until the display changes to the "24h/12h"
submenu. Release the Victorinox emblem
again.
Press the Victorinox emblem briefly while the
display is flashing to change the time format.
In the 12h mode, the time is indicated with
the added letters "pm" in the afternoon (0.00
- 12.00).
If the button is not pressed within 4 seconds,
the setting mode is quit automatically and the
new display accepted.
To Next Page
Loading...
Need help?
General