Victorinox Traveller User Manual

Traveller, Traveller Lite and Expedition Kit
November 5, 2015 9/10
Setting walking/travel time
(Timer)
Starting the timer
Press the Victorinox emblem for 2 seconds
and the timer is started with a beep tone.
Stopping the timer
Press the Victorinox emblem again for 2 sec-
onds and the timer is stopped with a beep
tone. The value is maintained and can be re-
started after a pause in the walk (2 seconds).
Resetting the timer
Press the Victorinox emblem for 4 seconds.
The timer is started first and then set to 0
(Reset). This is confirmed in each case by a
beep tone.

Victorinox Traveller Specifications

General

Blade size	91 mm
Knife type	Multi-tool knife
Construction type	Slip joint knife