68
Controls
Instruments/Features/Controls
Turn Signal Switch
The turn signal switch is located on the left handlebar. Use
the switch to activate a turn signal. The key must be in the
ON or ACC position.
• Push the switch to the left to activate the left turn signals.
• Push the switch to the right to activate the right turn
signals.
Turn signals automatically cancel after predetermined speed
and distance conditions are met. To manually cancel a signal,
move the switch to the center position and press it inward.
Tip: The momentary signal feature is useful when passing or chang-
ing lanes. To use the momentary feature, push and hold the
switch through at least one complete flash cycle (at least one
second) to activate the feature. The signal will then cancel the
moment the switch is released.
To Next Page
Loading...
