To Next PageTo Next PageWhat to do if my Victron energy Inverter battery is being overcharged?
If your battery is being overcharged, it could be due to a defect in a battery cell, requiring you to replace the battery. Alternatively, a large ambient temperature difference between the charger and battery could be the cause. In this case, make sure that ambient conditions are equal for the charger and battery.
How to fix a Victron energy Inverter charger that does not function?
If the charger isn't functioning, it might be due to a reversed PV connection; connect the PV correctly. Another potential cause is a reversed battery connection, which results in a non-replaceable fuse being blown, requiring a return to VE for repair.
Why is my Victron energy Inverter battery not fully charged?
There are several reasons why your battery might not be fully charged. It could be due to a bad battery connection, so check the battery connection. High cable losses can also prevent a full charge, in which case you should use cables with a larger cross-section. If there's a large ambient temperature difference between the charger and the battery, ensure that ambient conditions are equal for both. Lastly, only for a 24V system: if the charge controller is incorrectly set to 12V instead of 24V, disconnect the PV and battery, ensure the battery voltage is greater than 19V, and then reconnect properly, starting with the battery.
General| Brand | Victron energy |
|---|---|
| Model | BlueSolar MPPT 150/45-Tr |
| Category | Inverter |
| Language | English |
