Victron energy BlueSolar PWM-Pro Series User Manual

4
4. Programming the controller
The default settings (see specifications) can be modified with help of
software (available free of charge on our website), or with the remote
panel.
The panel must be connected to the controller with a standard RJ45 UTP
cable.
Possible settings (please see the software manual or the manual of the
remote panel for details):
Load programs:
• Manual Control (default)
• Light ON/OFF
• Light ON + Timer
• Time Control
Battery Type:
• Gel
• Sealed AGM (default)
• Flooded
• User defined

Victron energy BlueSolar PWM-Pro Series Specifications

General

Brand	Victron energy
Model	BlueSolar PWM-Pro Series
Category	Controller
Language	English