STEP THREEE: HOW SHOULD I MOUNT IT?
> Mounting the Camera
There are two ways to mount the Victure trail camera: using the provided adjustable web belt, or
the tripod socket.
1.
Using the Adjustable Web Belt
Push one end of the belt through the brackets on the back of the camera. Thread the end of the
strap through the buckle. Fasten on the belt securely around the tree trunk by pulling the end of
the strap firmly so there is no slack left.
2.
Using the Tripod Socket
The camera is equipped with a socket at the bottom and to enable mounting on a tripod we
provided.
To Next Page
Loading...
