EasyManua.ls Logo

Videx 526ST User Manual

Videx 526ST
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Videx 526ST and is the answer not in the manual?

Videx 526ST Specifications

General IconGeneral
TypeVideo Intercom
AudioFull Duplex
Power Supply12Vdc
Operating Voltage12Vdc
Housing MaterialPlastic

Summary

SENTRY 1 CONTROL UNIT

SENTRY 1 PCB

JP1 Power Connections

Details the power input and output terminals (VIN, VOUT, GND) on the Sentry 1 PCB.

JP2 Button Commons & Speech Lines

Describes the Button Commons and speech transmission/reception terminals for Door 1.

JP3 Engaged Output & Speech Lines

Details the engaged output and speech terminals for Door 2 on the Sentry 1 PCB.

JP4 Transmit/Receive Speech & Calltone

Outlines terminals for phone speech, calltone, lock trigger, and power supply connections.

JP6 Lock Relay Connections Door 1

Specifies the normally open, common, and normally closed terminals for lock release for Door 1.

JP7 Lock Relay Connections Door 2

Specifies the normally open, common, and normally closed terminals for lock release for Door 2.

4 WAY ISOLATION PCB

Installation

Lock Release Back EMF Protection

Describes the requirement for a diode to suppress back EMF on lock releases.

Safety Note

Provides a critical safety instruction regarding earth wire connection and continuity.

Testing the Installation

Outlines the steps for testing the system after installation, including call tone and speech.

TROUBLE SHOOTING GUIDE

No Speech from Door Panel

Troubleshooting steps for when there is no speech from the door panel.

Related product manuals