Need help?Do you have a question about the Videx VX2300 and is the answer not in the manual?
General| Brand | Videx |
|---|---|
| Model | VX2300 |
| Category | Intercom System |
| Language | English |
Details the features and components of the digital call panel, including camera and LCD display.
Lists and describes the physical components and connections of the Art.4302N panel.
Details the connection terminals available on the Art.4302N digital call panel.
Explains the step-by-step procedure for programming the unit using the panel keypad.
Provides important notes and clarifications regarding programming settings and functions.
Instructions on how to configure the primary camera source for the digital call panel.
Technical specifications for the Art.4302N digital call panel, including size and electrical data.
Describes the functional speaker module and its integrated circuitry for door entry systems.
Details the physical components and connections of the speaker unit module.
Lists the different versions available for the Art.4303N speaker unit module.
Describes the CCD camera module with auto-iris lens and illumination LEDs for door entry systems.
Details the components and connections of the Art.4330N camera module.
Technical specifications for the Art.4330N camera module.
Describes the intelligent intercom with push buttons, LEDs, and call tone volume control.
Details the function of each push button, LED indicator, and control on the intercom.
Explains the configuration settings using dip-switches and jumpers for the intercom.
Describes the intelligent videophone with flat screen monitor, push buttons, and service features.
Details the function of each push button, LED indicator, and control on the videophone.
Explains the configuration settings using dip-switches for the videophone.
Describes the hands-free video monitor with LCD display, push buttons, and controls.
Details the function of each push button, LED indicator, and control on the videomonitor.
Describes the slim hands-free video monitor with LCD display, push buttons, and controls.
Details the function of each push button, LED indicator, and control on the slim videomonitor.
Describes the hands-free intercom with push buttons and controls for VX2300 systems.
Details the function of each push button, LED indicator, and control on the intercom.
Describes the distribution box for connecting multiple videophones or intercoms to the bus.
Explains the terminals and jumpers for connecting the four-way distribution box.
Technical specifications for the Art.317 distribution box.
Describes the passive distribution box for connecting two videophones or intercoms.
Explains the terminals and jumpers for connecting the two-way passive distribution box.
Technical specifications for the Art.318 passive distribution box.
Describes the device that restores bus voltage levels and amplifies video signals.
Explains the terminals and jumpers for the BUS booster and amplifier.
Technical specifications for the Art.2315 BUS booster and amplifier.
Describes the unit required for systems with multiple entrances, allowing for amplification adjustment.
Explains the terminals and jumpers for the entrances exchanger.
Technical specifications for the Art.2301N entrances exchanger.
Describes the exchanger used on 2-level systems for block entrances, enabling stand-alone operation.
Explains the terminals, LEDs, and jumpers for the block exchanger.
Details how to set the exchanger's address and main door panel type using the dip-switch.
Describes the relay unit for extension sounders or general purpose relay activation.
Explains the terminals and DIP-switch for setting the relay operating mode.
Details how to set the relay addresses and activation times for different operating modes.
Describes the interface for connecting 4+1 audio devices to the VX2300 "2 Wire" Bus.
Explains the configuration settings using dip-switches and jumpers for the interface.
Details the programming of device address, privacy duration, and intercommunication modes.
Describes the specific power supplies for the VX2300 digital system, differing by system size.
Explains the terminals and jumpers for connecting the power supplies.
Provides instructions for installing the power supplies, including mains connection.
Describes the unit that converts the BUS line to a 12 Vdc power source for peripherals.
Lists the terminals for connecting the power supply converter.
Technical specifications for the Art.2322 power supply converter.
Specifies recommended cable types, resistance, capacitance, and maximum distances for the system.
Provides guidance on setting up bus devices and distributing video signals within the system.
Explains how to connect a local power supply when multiple videophones share an address.
To Next Page
