Power supply converter from BUS line to 12 Vdc
BUS
+
12V
-
Art.2322
Fig.1 Fig.2
DESCRIPTION
When this unit is connected to the BUS line it generates a +12Vdc – 100mA power source. This unit can be used to supply peripherals such as the
Art.4800 without the need for an additional power supply. Please note: The peripherals must not require more than 100mA.
CONNECTION TERMINALS
Terminal/Jumper Description
BUS
BUS line inputs
BUS
12V+
12Vdc – 100mA output
12V- (0V)
SPECIFICATION
Housing/Mounting
Plastic box 50x60x20mm / direct wall mounting
Push Buttons
N/A
Programming
N/A
Controls
N/A
Power Supply
Supplied by the BUS line
Working Temperature
-10 +50ºC
CUSTOMER SUPPORT INFORMATION
All Countries Customers UK Customers
VIDEX Electronics S.p.A.
www.videx.it – technical@videx.it
Tel.+39 0734 631669
Fax +39 0734 632475
VIDEX Security LTD
www.videx-security.com
Tech Line 0191 224 3174
Fax 0191 224 1559
The product is CE marked demonstrating its conformity and is for distribution within all
member states of the EU with no restrictions.
This product follows the provisions of the European Directives
89/336/EEC & 92/31/EEC (EMC),
73/23/EEC (LVD) and 93/68/EEC (CE marking).
Il prodotto è marchiato CE a dimostrazione della sua conformità e può essere distribui-
to liberamente all’interno dei paesi membri dell’unione europea EU.
Questo prodotto è conforme alle direttive Europee
89/336/EEC & 92/31/EEC (EMC),
73/23/EEC (LVD) e 93/68/EEC (Marcatura CE).
To Next Page
Loading...
