Need help?Do you have a question about the Viega ProPress and is the answer not in the manual?
General| Connection Type | Press Connection |
|---|---|
| Material | Copper, Stainless Steel |
| Temperature Range | 0°F to 250°F |
| Sizes Available | 1/2" to 4" |
| Applications | Potable water, heating, gas |
| O-Ring Material | EPDM |
| Standards | ASTM, NSF, CSA |
Document disclaimer regarding professional installation and explanation of warning and informational symbols used.
Details Viega ProPress systems, their applications, and key features like Smart Connect technology.
Emphasizes safety precautions, especially for drinking water installations, and approved sealing elements.
Lists approved applications, fluids, and gases for ProPress systems, including commercial, industrial, and fire protection.
Describes ProPress fittings, including types, sealing elements, and Smart Connect technology.
Details specific applications like commercial, industrial, and fire protection systems, plus design service contacts.
Covers certifications (CSA, NSF, UL, FM) and compliance with industry codes and standards for ProPress fittings.
Requirements for copper tubing and descriptions of Viega ProPress and ProPress XL-C fittings.
Information on the EPDM sealing element, its material properties, lubricant, and operating temperature.
Explains the function of cylindrical guides and details the various markings found on ProPress fittings.
Details Smart Connect technology for leak detection and lists required tools for press connections.
Addresses thermal expansion compensation and electrical bonding requirements for ProPress systems.
Covers protection against freezing, requirements for underground installations, and corrosion prevention.
Provides guidelines for mixed installations to prevent detrimental effects and corrosion, especially with galvanized steel.
Discusses managing pressure surges and the procedure for rotating a pressed fitting.
Explains fitting deflection caused by pressing and its implications for joint integrity.
Methods to minimize deflection during pressing, including alternate sides, push-pull, and re-pressing techniques.
Provides instructions for transporting and storing ProPress components to maintain their condition and integrity.
Ensures system components are checked for damage and provides instructions for replacing damaged sealing elements.
Covers tube mounting rules, pipe hanger functions, and essential space requirements for pressing tools.
Details transition fittings, minimum distances between fittings, and jaw clearance requirements.
Specifies clearance requirements for ProPress rings with various actuators and in confined spaces.
Guidance on soldering/brazing near ProPress fittings and existing soldered/brazed connections, with distance requirements.
Precautions for welding near ProPress fittings to protect the sealing element, specifying minimum distances.
Instructions for accurately cutting and thoroughly deburring the tube to ensure proper fitting installation.
Step-by-step guide for Viega ProPress installation, including checks and insertion depth marking.
Instructions for Viega ProPress XL-C installation, emphasizing compatible rings and component checks.
Details pressure testing methods using Smart Connect and standard procedures, plus disposal guidelines.
Covers warranty terms, exclusions, and claim processes for standard ProPress fittings and valves.
Details limited warranties for industrial and marine applications, specifying coverage periods and exclusions.
To Next Page
