Viega ProPress - Handling and Storage; Transport and Storage Guidelines

Handling Instructions
17 of 38
IM-PP 724607 1218 ProPress
All Viega ProPress components and associated tubing shall be free from
dirt, debris, or items that may interfere with the sealing element and the
press connection. Viega ProPress sealing elements, separator rings, and
grip rings are to be visually inspected prior to installation to ensure the
seal is intact and properly located within the 󶈵tting.
3 Handling Instructions
3.1 Transport
When transporting 󶈵ttings:
■ Do not pull or drag the 󶈵ttings or system components along other
surfaces.
■ Secure 󶈵ttings, tubing, and system components during transportation
to keep them from shifting.
■ Do not damage the protective cap on components or tube ends.
■ Do not remove protective caps until immediately before installing.
3.2 Storage
When storing materials:
■ Store 󶈵ttings, tubing, and system components in a clean and dry
place.
■ Do not store components directly on the 󶈶oor.
■ Provide at least three points of support for the storage of tubing.
■ Where possible, store di󶈴erent sizes separately.
■ Store small sizes on top of larger sizes if separate storage is not
possible.
■ Store 󶈵ttings, tubing, and system components of di󶈴erent materials
separately to prevent contact corrosion.