Overheating protection
The unit automatically switches off when the module or inverter
overheats.
Protection for high pressure or lack of refrigerant gas
The unit deactivates the air conditioning function in case of high
pressure to the system or a lack of refrigerant gas. The amount of
refrigerant gas is indicated on the compressor label.
High voltage protection
The unit switches off in case of high voltage dips to the electrical
system.
Malfunction indications
The unit can detect faults or failures though these cannot be solved by
the user.
- Should the temperature of the module
or inverter exceed the safety value, it
automatically enters the standby mode
signalling the problem with the relative
icon and giving off an audible signal.
- It will be possible to reuse the unit
when the temperature returns to
standard levels.
- Should the pressure increase or fall in
relation to the safety value, the module
automatically enters the standby mode
signalling the problem with the relative
icon and giving off an audible signal.
- In case of high pressure, it will be
possible to reuse the unit when the
temperature returns to standard levels.
- Should the voltage rise above the
safety value, the module automatically
enters the standby mode signalling the
problem with the related icon and
giving off an audible signal.
- It will be possible to reuse the unit
when the voltage returns to standard
levels.
- When this icon appears, contact an
authorised service centre.
Visit our website to check out the
nearest Authorised Service Centre.
To Next Page
Loading...
