EasyManua.ls Logo

Viessmann B1KA - Page 6

Viessmann B1KA
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Gas boiler, series B and C,
Category II
2H3P
Rated heating output range (to EN 677)
T
F
/T
R
= 50/30 °C kW 6.5 - 19.0 6.5 - 26.0 8.8 - 30.0 8.8 - 35.0
T
F
/T
R
= 80/60 °C kW 5.9 - 17.3 5.9 - 23.7 8.0 - 27.3 8.0 - 31.9
Flue gas parameters
Calculation values for sizing the flue system to EN 13384. Flue gas
temperatures as actual gross values at 20 °C combustion air temper-
ature.
Flue gas category to G 635/G 636 G
52
/G
51
G
52
/G
51
G
52
/G
51
G
52
/G
51
Flue gas temperature at a return temperature of 30 °C (significant for
the sizing of the flue system)
– At rated heating output °C 45 45 45 45
– At partial load °C 35 35 35 35
Flue gas temperature at a return temperature of 60 °C (used to deter-
mine the application range of flue pipes with max. permissible operat-
ing temperatures)
°C 68 68 70 70
Mass flow rate
Natural gas
– At rated heating output (DHW heating) kg/h 30.1 41.1 56.9 56.9
– At partial load kg/h 14.6 14.6 17.6 17.6
LPG
– At rated heating output (DHW heating) kg/h 34.0 46.4 62.0 62.0
– At partial load kg/h 15.9 15.9 19.4 19.4
Available draught Pa 100 100 100 100
mbar 1.0 1.0 1.0 1.0
Max. amount of condensate (according to DWA-A 251) l/h 2.5 3.4 3.9 4.6
Condensate connection (hose nozzle) Ø mm 20-24 20-24 20-24 20-24
Flue gas connection Ø mm 60 60 60 60
Ventilation air connection Ø mm 100 100 100 100
Standard seasonal efficiency [to DIN]
At T
F
/T
R
= 40/30 °C % Up to 98 (H
s
) [gross cv] / 109 (H
i
) [net cv]
Energy efficiency class
– Central heating A A A A
– DHW heating, draw-off profile XL — A A A
Information regarding the max. permissible gas supply pres-
sure
If the gas supply pressure is higher than the maximum permissible
value, install a separate gas pressure governor upstream of the sys-
tem.
Note on connection values
The connection values are only for reference (e.g. in the gas con-
tract application) or for a supplementary, rough estimate to check the
volumetric settings. Due to factory settings, the gas pressure must
not be altered from these values. Reference: 15 °C, 1013 mbar
(101.3 kPa).
Vitodens 100-W
(cont.)
6
VIESMANN
VITODENS
1
5546 630 GB

Table of Contents