Viessmann OpenTherm User Manual

24
08.
Use / to select the required
setting:
■ – "LOW END" for heating circuit
without mixer
– "LOW END 2" for heating cir-
cuit with mixer
■ – "END POINT" for heating cir-
cuit without mixer
– "END POINT 2" for heating
circuit with mixer
■ – "SHIFT" for heating circuit
without mixer
– "SHIFT 2" for heating circuit
with mixer
09. OK to confirm
10. Use +/- or the rotary selector to
change the setting.
11. OK to confirm
12. ESC to exit the settings.
Changing the room temperature for a few days (holiday
mode)
The holiday program starts on the set
leaving day and ends on the set return
day. The set time program is then
active again.
Press the following keys:
01. INFO
02. MODE
03.
Select "SETTINGS" with / .
04. OK to confirm
05.
Select "HOLIDAY" with / .
06. OK to confirm
START HOLIDAY appears briefly,
then the year flashes.
07. Change with +/-.
08. OK to confirm
The month flashes.
09. Change with +/-.
10. OK to confirm
The day flashes.
11. Set the day and hour in the same
way, and press OK to confirm.
END HOLIDAY appears.
12. Set END HOLIDAY the same way.
13. "FROST PROTECTION" appears.
Set the required set temperature.
14. OK to confirm
Central heating
Permanently changing the room temperature
(cont.)
5837779

Viessmann OpenTherm Specifications

General

Brand	Viessmann
Model	OpenTherm
Category	Temperature Controller
Language	English