Viessmann VITOPLEX 100?LS - Cleaning the Multiple Level Electrode; Cleaning the Water Level Indicator

15
Initial start−up, inspection and maintenance
Further details regarding the individual steps (cont.)
Cleaning the multiple level electrode
1. Remove electrodeA.
2. Clean electrode tipsC.
3. Clean the sealing faces and use a
new gasketB.
4. Install the electrodes and carry out
a safety test in line with the
manufacturer’s instructions.
5. Retighten new gaskets after
commissioning.
Cleaning the water level indicator
1. Blow out the water level indicator.
2. Remove upper plugA, and clean
the water level indicator with a
brush.
5692729 GB
A
B
C
A