Viessmann VITOPLEX 100?LS - Declaration of Conformity

29
Appendix
Declaration of conformity
We, Viessmann Werke GmbH&CoKG, D35107 Allendorf, declare as sole
responsible body, that the product
Vitoplex100LS
conforms to the following standards:
EN303
EN500821
EN50165
EN55014
EN60335
EN6100032
EN6100033
TRD guideline2003/2
This product is identified in
accordance with the following
directives:
73/23/EEC
89/336/EEC
97/23/EC
This product is certified on the basis
of the EC type test of the heated
pressure vessel (certificate
no.01202620/B04273127404P)
issued by the TÜV Rheinland/
BerlinBrandenburg, 10882Berlin,
as follows:
_0035
Details according to the Pressure Equipment Directive (97/23/EC):
H Heated pressure vessel
H ClassIII/IV in accordance with appendixII, diagram5
H ModulesB and D according to appendixIII
H Applied regulations: TRD
H Materials according to appendixI, 4.2, b) and TRD
H Anti−corrosion supplement according to appendixI, 2.2 and TRD
The pressure device was tested without equipment (safety equipment).
The pressure device must be equipped in accordance with current national
requirements before installation and the initial start−up.
The pressure equipment meets the requirements of current TRD regulations
in their amended form.
Therefore, the following test periods are suggested:
 annually: external test
 every three years: internal test and/or strength test designed as water
pressure test.
5692729 GB