Viessmann Vitotron 100 - Page 13

13
6155063
Control panel VMN3 (cont.)
Settings
A Period number (max. 5)
B Start time for buffer charging
C End time for buffer charging
■
Buffer program
(only available in buffer mode).
– Numbers 1 to 8 > Setting of 8 daily programs
each with 5 adjustable periods during which the
cylinder is charged.
The process for setting daily programs is
described in Daily schedule.
– Weekly: Assignment of one setting per day of the
week for the daily programs.
A Period number according to schedule (max. 5)
B Start time for selected temperature
C End time for selected temperature
D Temperature selection: ,
■
DHW program (only available in systems with a DHW cylinder):
– Numbers 1 to 8 > Setting of 8 daily programs per
day program with 5 adjustable periods, each of
which can be assigned a cylinder temperature
(
, ).
The process for setting daily programs is
described in Daily schedule.
Note:Ifnotemperatureisdened,an
energy saving temperature is used ( ).
– Weekly: Assignment of one setting per day of the
week for the daily programs.