ViewSat VS9000HD - (14) ΑΝΤΕΝΝA SET-UP

(14) ANTENNA SET-UP.
SATELLITE SET-UP FOR VS9000HD RECEIVER:
Satellites 119 / 110 / 91 / 82 ON THREE RECEIVERS
Using DPP44 switch with 1000.2 & Super dish no 8PSK Card.
Do a Factory Default first and upload new Bin File to Receiver.
Go To / Menu/Antenna Set-Up.
Select Satellite to use.
EchoStar 7 119.0W
LNB* power = on
LNB* type = ocs-dp (Set LNB Type Here)
LNB* freq = 11250
22KHz = off
TP* Freq = 12239
Diseqc* 1.0 = Port 1
Motor = Off
Legacy SW = None
"Exit" & save.
EchoStar 8,10 110.0W
LNB* power = on
LNB* type = ocs-dp (Set LNB Type Here)
LNB* freq = 11250
22KHz = off
TP* Freq = 12224
Diseqc* 1.0 = Port 2
Motor = Off
Legacy SW = None
"Exit" & save.
Nimiq 1,3 91.0W
LNB* power = on
LNB* type = ocs-dp (Set LNB Type Here)
LNB* freq = 11250
22KHz = off
TP* Freq = 12224
Diseqc* 1.0 = Port 3
Motor = Off
Legacy SW = None
"Exit" & save.
Nimiq 2 82.0W
LNB* power = on
LNB* type = ocs-dp (Set LNB Type Here)
LNB* freq = 11250
22KHz = off
TP* Freq = 12224
Diseqc* 1.0 = Port 4
Motor = Off
Legacy SW = None
"Exit" & save.
Document page.8
VIEWSAT 9000HD User Troubleshooting Guide & Manual. April /2008