43
3. Time log data example
Assumed the power-on/off record of display#01 as below
2014-8/31 08:00 On
2014-8/31 22:00 Off
2014-9/1 10:30 On
2014-9/1 11:00 To send “GET-Time log” command
Send: 0x 38 30 31 67 31 30 30 30 0D
Reply:
#1 0x 38 30 31 72 3101 08 31 0D (On 8/31)
#2 0x 38 30 31 72 3101 08 00 0D (On 08:00)
#3 0x 38 30 31 72 3100 08 31 0D (Off 8/31)
#4 0x 38 30 31 72 3100 22 00 0D (Off 22:00)
#5 0x 38 30 31 72 3101 09 01 0D (On 9/1)
#6 0x 38 30 31 72 3101 10 30 0D (On 10:30)
4. Get Date example
Assumed the current date of display#01 as below
Date: 2017-3/15
Send: x 38 30 31 67 32 59 30 30 0D (Get Date:Year)
Reply: x 38 30 31 72 32 59 31 37 0D (“Y17”)
Send: x 38 30 31 67 32 4D 30 30 0D (Get Date:Month)
Reply: x 38 30 31 72 32 4D 30 33 0D (“M03”)
Send: x 38 30 31 67 32 44 30 30 0D (Get Date:Day)
Reply: x 38 30 31 72 32 44 31 35 0D (“D15”)
5. Get Time example
Assumed the current time of display#01 as below
Time: 16:27:59
Send: x 38 30 31 67 33 48 30 30 0D (Get Time:Hour)
Reply: x 38 30 31 72 33 48 31 36 0D (“H16”)
Send: x 38 30 31 67 33 4D 30 30 0D (Get Time:Min)
Reply: x 38 30 31 72 33 4D 32 37 0D (“M27”)
Send: x 38 30 31 67 33 53 30 30 0D (Get Time:Sec)
Reply: x 38 30 31 72 33 53 35 39 0D (“S59”)
To Next Page
Loading...
