To Next PageTo Next PageWhy is there no picture on my ViewSonic Monitor?
There might be several reasons: * The power cord may be disconnected. Ensure it is properly plugged in. * The main power switch on the back of the display might not be switched on. Make sure it is on. * The selected input may have no connection. Connect a signal cable to the display. * The display could be in standby mode.
What to do if the ViewSonic CDM4300R Monitor image is distorted with abnormal patterns?
If your ViewSonic Monitor displays a distorted picture with abnormal patterns, check the following: * Ensure the signal cable is firmly attached. * Verify the video signal source is within the display's capabilities, referring to the specifications section for confirmation.
Why does my ViewSonic CDM4300R Monitor image doesn’t fill up the full size of the screen?
If the display image doesn’t fill up the full screen size on your ViewSonic Monitor, it may be due to incorrectly set zoom mode. Use the Zoom mode or Custom zoom function in the Screen menu to fine tune display geometry and time frequency parameter.
What to do if I can see picture but no sound is heard on my ViewSonic CDM4300R?
If you can see the picture but cannot hear any sound, consider the following: * Check if the source signal cable is improperly connected and ensure that both video and sound inputs are correctly connected. * Verify that the volume isn't turned all the way down by pressing the [VOL DOWN] or [VOL UP] button. * Ensure that [MUTE] is not turned on by using the [MUTE] button. * If you are using external speakers, check if they are connected and adjust the volume to a suitable level.
What to do if I can hear sound, but no picture on ViewSonic CDM4300R Monitor?
If you can hear sound but there is no picture on your ViewSonic Monitor, the source signal cable might be improperly connected. Ensure that both video inputs and sound inputs are correctly connected.
Why do after-images can still be seen on the ViewSonic display after the display is powered off?
If after-images are visible on your ViewSonic display even after it's powered off, it's likely because a still picture was displayed for an extended period. Avoid displaying still images for long durations, as this can cause a permanent after-image.
What if some picture elements do not light up on ViewSonic CDM4300R?
This display is manufactured using an extremely high level of precision technology: however, sometimes some pixels of the display may not display. This is not a malfunction.
General| Screen Size | 43 inches |
|---|---|
| Panel Type | IPS |
| Viewing Angles | 178° horizontal, 178° vertical |
| Speakers | 10W x 2 |
| VESA Mount Compatible | Yes (200 x 200 mm) |
| Aspect Ratio | 16:9 |
| VESA Mount | 200 x 200 mm |
| Response Time | 8 ms |
| Connectivity | HDMI, USB |
| Color Support | 1.07 Billion Colors |
| Input Ports | HDMI, VGA |
| Built-in Speakers | Yes |
Important precautions for safe operation and handling of the monitor.
Steps for unpacking the display and checking contents.
Lists all items included in the package.
Important notes regarding installation environment and power.
Identifies and explains the buttons on the display's control panel.
How to select and view video sources.
Adjusting picture aspect ratios and formats.
Adjusting picture settings like brightness, contrast, and color.
Adjusting screen settings like position, zoom, and auto-adjust.
Instructions for cleaning the display and cabinet.
Common issues and their solutions.
Detailed technical specifications for the CDM4300R model.
Contact information for technical support and service by region.
Details what is covered and not covered by the warranty.
Instructions on how to obtain warranty service.
Details what is covered and not covered by the Mexico warranty.
Instructions for obtaining Mexico warranty service.
