ViewSonic EP1031r - Basic Settings Configuration; Wireless Network Connection

7
2.2 Basic settings
You must attach a USB mouse to the signboard to configure settings.
(Fig. 2.2.1)
Basic settings allow users to configure 3 important signage application settings:
Network, Time zone and Content.
Each time the Basic settings menu is entered, the signboard will start playback
automatically after 15 seconds if content services have been set previously. Auto
playback can be canceled by clicking on the button while it’s counting down.
To enter the Advanced Setting menu, click the Advanced button.
2.3 Connecting the EP1031r/EP1032r-T to your network
Wireless connection
1. Click the Wireless LAN setting, and the wireless configuration UI will be
launched.
(Fig. 2.3.1)