17
4. The On times assigned in time slots A-E are inclusive, as seen in the schedule
assigned here:
(Fig. 2.9.5)
The exact playback time will are depicted by blue time, as shown in figure 2.9.6.
Dark blue represents time overlaps between C/D and D/E.
(Fig. 2.9.6)
2.10 Display settings
Output Mode
The default output mode is set to Panel. (Fig. 2.10.3)
If you are connecting to a monitor via HDMI port, refer to the device specifications for
the best matching setting.
Note: The signboard supports only one output device at a time.
To Next Page
Loading...
Need help?
General
