ViewSonic EP1042T User Manual

18
2.10. Display settings
Output Mode
The default output mode is set to Panel.
If you are connecting to a monitor via HDMI compatible port, refer to the
device specications for the best matching setting.
Note: The signboard supports only one output device at a time.
1. Click on the Advanced button. The advanced conguration menu will be
launched.
2. Click on Display/sound, and then click on Display. The Display Settings
page will be launched.
3. Select Resolution from the popup menu.

ViewSonic EP1042T Specifications

General

Brand	ViewSonic
Model	EP1042T
Category	Monitor
Language	English