9
3.3 Network Settings
The Multimedia Digital Poster has been set before delivery from factory. You cannot
change Machine ID or MAC Address. You can set Server Settings and Get IP Type
according to the current network environment through the remote control.
Press SETUP button to enter menu setup. Press Up, Down buttons to select
Network Settings, and press PLAY button to display Network Settings options.
There are totally 4 options available: Server Settings, Get IP Type, Machine ID and
MAC Address.
Server Settings
Select Server Settings menu, and press PLAY button to confirm. If you need to
modify the Server ID, use the navigation buttons on the remote control to select
numbers on the soft keyboard. The range is 0000~9999. If you want to back previous
menu, please select BACK icon then press PLAY button to confirm.
To Next Page
Loading...
Need help?
General
