43
Description of each menu
Function Description
Screen Color See "Using Screen Color" on page 26 for details.
Aspect Ratio See "Selecting the aspect ratio" on page 24 for details.
Keystone See "Correcting keystone" on page 23 for details.
Position
Displays the position adjustment page. To move the projected
image, use the directional arrow keys. The values shown on the
lower position of the page change with every key press you made
until they reach their maximum or minimum.
This function is only available when a PC input signal is
selected.
The adjustment range may vary under different timings.
Phase
Adjusts the clock phase to reduce image
distortion.
This function is only available when
a PC input signal is selected.
H. Size
Adjusts the horizontal width of the image.
This function is only available when a PC input signal is
selected.
Zoom
See "Magnifying and searching for details" on page 24 for
details.
3D Settings See "Using the 3D functions" on page 31 for details.
Pattern
The projector can display several test patterns. It helps you adjust
the image size and focus and check that the projected image is
free from distortion.
To Next Page
Loading...
