32
Optimize images in user mode
Selecting a picture mode
●The projector is preset with several predened picture modes. You may choose one of
these modes that best ts your operating environment and input signal picture type.
●To select an operation mode that suits your need, please follow the steps described
below.
●Press [Color Mode] repeatedly until you arrive at the mode you desire.
●Connect to the signal source, then press the [Setting] key to open the menu. Then
select Image Setting > Color Mode menu and press [Enter]. Then press / select
the desired mode.
Picture modes for different types of signals
The following lists the Picture modes that can be used for different signal types.
1. Standard mode: Suitable for normal conditions during the daytime.
2. Gaming: Tint suitable for gaming.
3. Movie Mode: Applicable for playing colored movies, video clips from digital cameras,
or DVs from a PC input in darker (dim) environments to achieve the best viewing
effects.
4. Brightest mode: Maximizes the brightness of the projected image. This mode is
suitable when using projectors in environments such as well-lit rooms where extra-
high brightness is required.
5. Sports mode: Tint suitable for watching sporting events.
6. User 1/User 2: Users can adjust the color according to their preferences.
Note: Switching to Movie mode will trigger the lter glass and bring about slight operating sounds.
To Next Page
Loading...
