ViewSonic M2W - USB Connection

19
USB Connecon
1.5 A
USB-C Connecon
Connect one end of a USB Type-C cable to the USB-C port of your device. Then
connect the other end of the cable to the USB-C port of your projector.
NOTE:
• Ensure your USB Type-C device can support video transmission.
• The M2W can also use a USB-C connected power bank to turn on the
system. However, the brightness level will be limited to 60% of Full.
USB Type-A Connecon
Connect one end of a USB Type-A cable to the USB-A port of your device (if
applicable). Then connect the other end of the cable to the USB-A port of your
projector.

the projector’s USB-A port. To learn more about managing storage device, e.g. USB
