ViewSonic Moderro NMP012 - Configuring Video Wall; 4.2 Reboot All Devices in Video Wall

20
4 ConguringVideoWall
This chapter explains how to configure the video wall.
4.1 Identify All Devices in Video Wall
1. Select the wall from the Walls and Devices pane.
2. Click Identify from the Wall Control pane to learn the following information about
the devices which will be displayed on each screen.
• Date
• Name
• IP
• Uptime
• Product
• Version
• Build
• NTP
• PTP Mode/Source
4.2 Reboot All Devices in Video Wall
You can reboot all devices in the video wall at once.
1. Select the wall from the Walls and Devices pane.
2. Click Reboot from the Wall Control pane. A confirmation dialog appears.
3. Click Reboot.