ViewSonic N1900w - Function Menu; OSD Menu

ViewSonic N1900w
19
ENGLISH
Function Menu
When input source is TV, PC, DVI, D-SUB
(YPbPr) or AV:
When input source is SCART:
Sleep Timer: To set TV sleep timer between 15 min, 30 min, 45 min, 60 min, or OFF.
Source Select: To select input source between TV, PC, DVI, SCART, D-SUB (YPbPr) and AV
with ◄►.
CANAL+: To enable SCART connector to support CANAL+ Set Top Box (available in French).
For normal SCART function, please select OFF.
Note: The CANAL+ function is available only when the input source is SCART.
Language: To select the language of OSD with ◄►.
OSD H. Position: To adjust the horizontal position of OSD.
OSD V. Position: To adjust the vertical position of OSD.
OSD Time Out: To set up the display time of OSD. (15, 30, 45, and 60 seconds)
Memory Recall: To recall factory setting condition. Press ENTER to recall all settings.
OSD Menu
It is active in all input sources.