ViewSonic N1900w
6
ENGLISH
Getting Started
• Multimedia TV Display
• Power Cable x2
• RF Cable
• Quick Start Guide
Congratulations on your purchase of a ViewSonic
®
Multimedia TV Display.
Important! Save the original box and all packing material for future shipping needs.
Package Contents
Your Multimedia TV Display package includes:
• Remote Control with batteries
• SCART Cable
• D-SUB to YPbPr Cable
• ViewSonic User Guide
• Read the Important Safety Instructions, at the start of this manual.
• Do not install in a moist or wet environment. This equipment is intended for indoor use only.
• Do not install near heat source, or strong magnetic fields.
• Use only approved wall brackets capable of supporting the weight of the Multimedia TV Display.
• Mount your Multimedia TV Display to a supporting wall.
• Ensure there is at least 3cm of space surrounding any air-vents of Multimedia TV Display.
Fixing ViewSonic Multimedia TV Display to the Wall
The Multimedia TV Display can be wall-mounted or freestanding. Before installing the product
to the wall, please consider the following guidelines:
To detach the wall-mounting bracket to Multimedia TV Display safely, please use the following
guidelines:
1. Disconnect the power and any other cables that might hinder moving the Multimedia TV Display.
2. Set the Multimedia TV Display on a table or work surface, screen-down with a towel or
woolen blanket between the screen and the surface to protect the display.
3. Through the matching screw holes in the bracket, there are 4 screws mounted on the backside
of the Multimedia TV Display. Loosen all 4 screws, and keep for future use.
Use only approved wall-mounting brackets advised by ViewSonic or your local distributor.
Notes:
• If your Multimedia TV Display is already set up for free-standing operation, you need to
first remove the stand before mounting the device to the wall.
• The wall-mount screw type: M4 x L10
To Next Page
Loading...
Need help?
General