ViewSonic NX2232w
16
ENGLISH
Basic Operation
To operate your LCD TV, you may use the TV remote control or top panel buttons to
select input source, change channels, or adjust volume.
Turning on the LCD TV
Before using the LCD TV:
1. Connect external equipment properly.
2. Insert the power plug, and the power LED indicator will light orange.
Power On/Off
To turn the LCD TV on/off:
Press the POWER button under the LCD TV, or press the POWER button on your
remote control to turn on/off the TV. The power LED indicator lights blue when the
LCD TV is on.
Selecting input source
To select the required input source:
Press the INPUT button on the remote control. Use ▲▼ to select the required input
source between TV, AV, S-Video, YPbPr, HDMI, and D-SUB.
To confirm the selection, press
ENTER.
Volume adjusting
Press VOL+/- to adjust the volume.
To turn off the volume, press
MUTE.
If you want to restore volume, press MUTE again, or press VOL+/- directly.
INFO
To display the current information of the LCD TV:
Press INFO, and the current state will be displayed on the screen. (It shows all or
some of the information about Input, Channel, Resolution, Audio Type, etc., depending
on what input source it is in.)
＊
The picture here shows an example of the INFO screen in a DTV source.
To Next Page
Loading...
Need help?
General