ViewSonic NX2232w
32
ENGLISH
Unit cannot be
operated
• External influences such as lightning or static electricity may cause
improper operation. In this case, operate the unit after first turning on
the power of the LCD TV and the AVC System, or unplug the AC cord
for 1 to 2 minutes, then replug again.
Power is cut off
suddenly
• Is the sleep timer set in advance?
• Is there no signal in PC mode or HDMI mode?
• The internal temperature of the unit has increased. Remove any objects
blocking the vent or clean as necessary.
No CATV
reception (or no
reception above
CH13)
• Is the AIR/CABLE option set correctly? Please set the AIR/CABLE
option to CABLE referring to the user guide.
• CATV is connected improperly or not connected; please check all the
CATV connections.
• The cable TV service is interrupted; please contact your cable operator.
Picture is cut
off/with sidebar
screen
• Is the image positioned correctly?
• Are screen mode adjustments such as picture size set correctly?
• Press WIDE button repeatedly on the remote control to see if you can
get the picture you prefer.
To Next Page
Loading...
Need help?
General