ViewSonic PJD6250L - Connection Ports Guide

7
Connection ports
1. AUDIO OUT
Connect to a speaker or other audio input equipment.
2. AUDIO IN 2 / MIC
Connect an audio output from video equipment / computer or Microphone to this
jack.
Note: The function for switching to Audio in 2 / Microphone in is in OSD
menu.
3. MINI USB
This connector is for firmware update and mouse function support.
4. AUDIO IN 1
Connect an audio output from video equipment or computer to this jack.
5. S-VIDEO
Connect S-Video output from video equipment to this jack.
6. VIDEO
Connect composite video output from video equipment to this jack.
7. COMPUTER IN 1
Connect image input signal (analog RGB or component) to this jack.
8. COMPUTER IN 2
Connect image input signal (analog RGB or component) to this jack.
9. RS-232
When operating the projector via a computer, connect this to the controlling com-
puter's RS-232C port.
10. MONITOR OUT
Connect to a computer display, etc.
11. HDMI
Connect HDMI output from video equipment to this jack.
12. LAN
RJ45 connector for Ethernet connection.
13. USB TYPE A
5V/2A out for power charging.
4
7
9
13
12
11
10
5
6 8
3
2
1