13
Remote control operation
Point the remote control at the infrared remote sensor and press a button.
• Operating the projector from the
front.
Note
• The remote control may not operate when there is sunlight or other strong light such as
a fluorescent lamp shining on the remote sensor.
• Operate the remote control from a position where the remote sensor is visible.
• Do not drop the remote control or jolt it.
• Keep the remote control out of locations with excessively high temperature or humidity.
• Do not get water on the remote control or place wet objects on it.
• Do not disassemble the remote control.
7m
5m
15
15
8m
To Next Page
Loading...
