42
Reset the lamp Hour to 0 hours.
Lamp Hours
Display the lamp’s elapsed operating time (in hours).
Filter Settings (Optional)
Filter Mode
Use this function to activate filter mode after the projector is installed an optional filter
cover.
Reset Filter Hours
Reset the filter Hour to 0 hours.
Filter Hours
Display the filter’s elapsed operating time (in hours).
Remote Control Code
See "Remote control code" on page 10 for details.
Advanced
Security Settings
• Change Password: Allows you to set or change the password.
• Power on Lock: If you enable this function, you will have to enter the password next
time you turn on the projector.
See "Securing the projector" on page 23 for details.
Panel Key Lock
Disables or enables all panel key functions except Power on the projector and keys on
the remote control. See "Locking control keys" on page 25 for details.
Reset Settings
Restore settings to factory default. The following settings will still remain: Keystone,
Language, Projector Position, High Altitude Mode, Security Settings, Remote Control
Code.
To Next Page
Loading...
