To Next PageTo Next PageWhat to do if my ViewSonic VA2430-h power is on, but no image appears?
First, check that the video cable connecting your monitor to the computer is properly and securely connected. If the connection is fine, adjust the brightness and contrast settings. Lastly, make sure the correct input source is selected.
What to do if my ViewSonic VA2430-h screen image cuts in and out?
Ensure the correct input source is selected. Inspect the video cable connector for bent or broken pins. Also, make sure the video cable connecting the monitor to the computer is properly and securely connected.
Why are the colors wrong or abnormal on my ViewSonic VA2430-h?
If any colors (red, green, or blue) are missing, check the video cable to ensure it is properly and securely connected. You can also connect the monitor to another computer to test if the issue persists.
Why does my ViewSonic Monitor have wrong colors?
If the colors on your ViewSonic Monitor appear wrong or abnormal, and any colors (red, green, or blue) are missing, check the video cable to ensure it is properly and securely connected. You can also connect the monitor to another computer to test it. If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.
What causes the ViewSonic VA2430-h Monitor screen image to cut in and out?
If the screen image on your ViewSonic Monitor cuts in and out, ensure that the correct input source is selected. Check the video cable connector for bent or broken pins. Also, make sure the video cable connecting the monitor to the computer is properly and securely connected.
How to fix ViewSonic VA2430-h Monitor screen image that is too light or dark?
If the screen image on your ViewSonic Monitor is too light or dark, adjust the brightness and contrast settings via the OSD Menu. If that doesn't work, reset the monitor to factory settings.
How do I fix a blurred screen image on my ViewSonic VA2430-h Monitor?
If the screen image on your ViewSonic Monitor is blurred, adjust the resolution to the correct Aspect Ratio. If the issue persists, reset the monitor to factory settings.
Why does my ViewSonic VA2430-h Monitor screen appear yellow?
If the screen on your ViewSonic Monitor appears yellow, make sure the “Blue Light Filter” is turned Off.
Why is there no image on my ViewSonic Monitor when an external device is connected?
If the external device is connected to your ViewSonic monitor, but no image appears on the screen, make sure the power is on. Adjust brightness and contrast via the OSD Menu. Also, check the connecting cable and make sure it is properly and securely connected.
Why are the colors on my ViewSonic VA2430-h Monitor wrong?
If the colors on your ViewSonic monitor appear wrong or abnormal, and any colors (red, green, or blue) are missing, check the video cable to ensure it is properly and securely connected. Loose or broken pins in the cable connector could cause an improper connection. You can also connect the monitor to another computer. If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.
General| Screen Size | 24 inch |
|---|---|
| Panel Type | IPS |
| Refresh Rate | 60 Hz |
| Brightness | 250 cd/m² |
| Aspect Ratio | 16:9 |
| Color Support | 16.7 million colors |
| Resolution | 1920 x 1080 |
| Ports | HDMI, VGA |
| Viewing Angle | 178º (H) / 178º (V) |
| Contrast Ratio | 1000:1 (static) |
| Response Time | 5ms (GtG) |
| Power Consumption | 25W (typ) |
