How to fix a ViewSonic VA2430-h screen that is too light or dark?
If the screen image on your ViewSonic Monitor appears too light or dark, adjust the brightness and contrast settings via the OSD Menu, or reset the monitor to its factory settings.
Why does my ViewSonic VA2430-h Monitor display wrong or abnormal colors?
If you see wrong or abnormal colors on your ViewSonic Monitor, check the video cable to ensure it's properly connected. If colors are still off, try connecting the monitor to another computer. If you have an older graphics card, contact ViewSonic for a non-DDC adapter.
Why does the screen image cut in and out on my ViewSonic Monitor?
If the screen image on your ViewSonic Monitor cuts in and out, verify that the correct input source is selected, inspect the video cable connector for bent or broken pins, and ensure the video cable is securely connected to both the monitor and the computer.
What to do if my ViewSonic Monitor has no power?
First, ensure the monitor is turned on via the Power button. Check that the power cord is properly and securely connected to both the monitor and the power outlet. To verify the outlet is working, plug another electrical device into it.
What causes my ViewSonic VA2430-h Monitor screen image to cut in and out?
If your ViewSonic monitor's screen image is cutting in and out, ensure the correct input source is selected. Check the video cable connector for bent or broken pins. Also, make sure the video cable connecting the monitor to the computer is properly and securely connected.
Why are the colors on my ViewSonic VA2430-h Monitor wrong?
If the colors on your ViewSonic monitor appear wrong or abnormal, and any colors (red, green, or blue) are missing, check the video cable to ensure it is properly and securely connected. Loose or broken pins in the cable connector could cause an improper connection. You can also connect the monitor to another computer. If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.
Why does my ViewSonic VA2430-h screen image cut in and out?
If the screen image on your ViewSonic monitor cuts in and out, first ensure the correct input source is selected. Check the video cable connector for bent or broken pins. Also, make sure the video cable connecting the monitor to the computer is properly and securely connected.
Why is there no image on my ViewSonic Monitor when an external device is connected?
If the external device is connected to your ViewSonic monitor, but no image appears on the screen, make sure the power is on. Adjust brightness and contrast via the OSD Menu. Also, check the connecting cable and make sure it is properly and securely connected.
Why does my ViewSonic VA2430-h Monitor screen appear yellow?
If the screen on your ViewSonic Monitor appears yellow, make sure the “Blue Light Filter” is turned Off.
How do I fix a blurred screen image on my ViewSonic VA2430-h Monitor?
If the screen image on your ViewSonic Monitor is blurred, adjust the resolution to the correct Aspect Ratio. If the issue persists, reset the monitor to factory settings.
General| Screen Size | 24 inch |
|---|---|
| Panel Type | IPS |
| Refresh Rate | 60 Hz |
| Brightness | 250 cd/m² |
| Aspect Ratio | 16:9 |
| Color Support | 16.7 million colors |
| Resolution | 1920 x 1080 |
| Ports | HDMI, VGA |
| Viewing Angle | 178º (H) / 178º (V) |
| Contrast Ratio | 1000:1 (static) |
| Response Time | 5ms (GtG) |
| Power Consumption | 25W (typ) |
To Next Page