To Next PageTo Next PageWhat to do if my ViewSonic Monitor has no power?
First, ensure the monitor is turned on via the Power button. Check that the power cord is properly and securely connected to both the monitor and the power outlet. To verify the outlet is working, plug another electrical device into it.
What to do if power is on, but no image appears on my ViewSonic VA2432-mhd Monitor screen?
Check that the video cable connecting your monitor to the computer is securely connected. Try adjusting the brightness and contrast settings. Also, verify that the correct input source is selected.
Why is my ViewSonic VA2432-mhd screen image too light or dark?
Adjust the brightness and contrast settings using the OSD Menu. If that doesn't work, try resetting the monitor to its factory settings.
How to fix a blurred screen image on my ViewSonic VA2432-mhd?
Adjust the resolution to the correct Aspect Ratio. If the blurring continues, try resetting the monitor to its factory settings.
What to do if my ViewSonic VA2432-mhd Monitor screen image cuts in and out?
Ensure the correct input source is selected. Inspect the video cable connector for bent or broken pins. Also, make sure the video cable connecting the monitor to the computer is properly and securely connected.
Why are the colors wrong or abnormal on my ViewSonic monitor?
If any colors (red, green, or blue) are missing, check the video cable to ensure it is properly and securely connected. You can also connect the monitor to another computer to test if the issue persists.
Why isn’t my ViewSonic Monitor screen centered correctly?
Adjust the horizontal and vertical controls via the OSD Menu. Check the Aspect Ratio. If problems persist, reset the monitor to factory settings.
Why does the screen appear yellow on my ViewSonic VA2432-mhd Monitor?
Make sure the “Blue Light Filter” is turned Off.
What to do if the OSD Menu does not appear on the screen or the OSD controls are inaccessible on my ViewSonic VA2432-mhd Monitor?
Check whether the OSD Menu is locked. If it is not locked, turn off the monitor, unplug the power cord, plug it back in, and then turn the monitor back on. If the problem continues, reset the monitor to factory settings.
Why are some menus not selectable in the OSD on my ViewSonic VA2432-mhd?
Adjust the ViewMode or the input source. If that doesn't solve the issue, reset the monitor to factory settings.
Details the input/output connections available on the monitor.
Step-by-step guide for attaching the monitor stand.
Instructions for connecting the monitor to a power source.
Detailed technical specifications of the monitor.
General