ViewSonic VB-CAM-201 - Page 13

13
Host Mode



capacity.
NOTE: 

Host 1 and Host 2.
Host 1:
Under Host 1, the audio is only output from VB-AUD-201 and the speaker on VB-
CAM-201 is mute. If the voice out volume is too low, adjust the volume on VB-
AUD-201.
Voice Out
Voice Out
Mic In
Mic In
Host 2:
Under Host 2, the audio will output from both VB-CAM-201 and VB-AUD-201

the VB-AUD-201 is limited to a minimum level and cannot be adjusted.
Voice Out
Mic In
Mic In
NOTE: 
mode in BT Host Mode
Refer to page 37
Host 2 mode.