Why are USB devices not working on my ViewSonic Monitor?
If USB devices connected to your ViewSonic monitor aren't working, make sure the USB cable is connected properly. Try using a different USB port if available. Note that some USB devices need more power, so connect them directly to the computer instead.
What to do if the OSD Menu does not appear on ViewSonic VG275 Monitor?
If the OSD Menu doesn't appear on your ViewSonic monitor, check if the OSD Menu is locked. If it is, press and hold keys 2 and 3 for 10 seconds. If that doesn't work, turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor. Alternatively, reset the monitor to factory settings.
Why are some menus not selectable in the OSD of my ViewSonic monitor?
If some menus are not selectable in the OSD on your ViewSonic monitor, try restarting the computer. You can also adjust the ViewMode or the input source. If the problem persists, reset the monitor to factory settings.
How to fix Quick Menu when it doesn't appear on ViewSonic VG275?
If the Quick Menu doesn’t appear on your ViewSonic monitor, try restarting the computer. If that doesn't work, turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor. You can also reset the monitor to factory settings.
Why does my ViewSonic VG275 screen appear yellow?
If the screen on your ViewSonic monitor appears yellow, make sure the “Blue Light Filter” is turned off.
General| Screen Size | 27 inches |
|---|---|
| Resolution | 1920 x 1080 (Full HD) |
| Panel Type | IPS |
| Refresh Rate | 75 Hz |
| Response Time | 5ms (GtG) |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Aspect Ratio | 16:9 |
| Viewing Angles | 178° horizontal, 178° vertical |
| VESA Mount | 100 x 100 mm |
| Color Support | 16.7 million colors |
| Built-in Speakers | Yes |
| Ports | HDMI, DisplayPort, VGA |
| Power Consumption | 25W |
| Weight | 10.8 lbs |
| Speakers | 2 x 2W |
To Next Page
