To Next PageTo Next PageWhat to do if ViewSonic ViewBoard IFPG1 Monitor has no sound?
If your ViewSonic monitor has no sound, first press the Mute/Unmute button. If that doesn't work, adjust the volume. Lastly, check the audio cable.
Why does my ViewSonic ViewBoard IFPG1 Monitor turn off unexpectedly?
If your ViewSonic monitor is turning off unexpectedly, check whether Sleep mode is enabled. You should also check if there is a power outage in your area. You can also turn on the display and see if the problem is with the signal and control system.
How to troubleshoot 'No PC signal' on ViewSonic ViewBoard IFPG1?
If your ViewSonic monitor displays 'No PC signal', check the display settings. Also, check the display resolution. Finally, adjust the Hs & Vs (synchronization) settings using the OSD menu.
Why is there no picture or sound on my ViewSonic ViewBoard IFPG1?
If there is no picture or sound on your ViewSonic monitor, you should first check the power status. Then, check the signal cable. Finally, verify that the internal PC is installed correctly.
How to resolve poor picture quality on ViewSonic ViewBoard IFPG1 Monitor?
To resolve poor picture quality on your ViewSonic Monitor, adjust chroma, brightness, and contrast settings in the menu. Also, check the signal cable.
What to do if my ViewSonic ViewBoard IFPG1 touch function doesn't work?
If the touch function on your ViewSonic monitor isn't working, check that the drivers are installed correctly. You may also try to reinstall the driver(s). Another step is to check the setup and align it. Finally, check whether the touch pen is working properly.
How to fix ViewSonic Monitor when remote control is not working?
If the remote control for your ViewSonic monitor isn't working, start by checking if anything is obstructing the display’s remote control receiver. Next, check if the batteries in the remote control are installed correctly. Finally, check if the batteries need to be replaced.
How to fix unclear or cutting in and out picture on ViewSonic ViewBoard IFPG1 Monitor?
If the picture on your ViewSonic monitor is unclear or cuts in and out, check the signal cable. Also, check if other electronics are interrupting the signal.
Why is there sound coming from only one speaker on my ViewSonic ViewBoard IFPG1 Monitor?
If sound is only coming from one speaker on your ViewSonic monitor, adjust the sound balance in the menu. Also, check the sound control panel settings of the computer and the audio cable.
How to fix background streaking on ViewSonic Monitor?
To fix background streaking on your ViewSonic monitor, choose auto adjust. If that doesn't work, adjust clock and phase.
General| Resolution | 3840 x 2160 (4K UHD) |
|---|---|
| Panel Type | IPS |
| Response Time | 8ms |
| RAM | 4GB |
| Storage | 32GB |
| Touch Technology | Infrared |
| Touch Points | Up to 20 points |
| Brightness | 350 cd/m² |
| Contrast Ratio | 1200:1 |
| Viewing Angle | 178° (H/V) |
| Connectivity | HDMI, VGA, USB |
| Operating System | Android |
| Processor | Quad-Core |
