ViewSonic ViewBoard IFPG1 Series - Page 51

51
Item
Descripon
Signal
Auto Signal Detecon
Enable to automacally detect input sources and display them.
No Signal Standby
Enable to go to standby mode when there is no input source
detected.
Port
HDMI with One Wire
When ON, HDMI CEC will be enabled. HDMI CEC synchronizes
device power on/o operaon via HDMI connecon.
USB Cloning
Import/export OSD Sengs to a USB storage device.
USB Auto Play
When on, the ViewBoard will copy media les from an external
storage device (e.g., USB drive) to internal storage, then play the
media les automacally.
Others
Switch On State
Select the display status for the next me the power cord is
connected to a power outlet.
Mode Descripon
Power O
The ViewBoard will remain OFF when the
power cord is connected.
Forced On
The ViewBoard will turn ON when the power
cord is connected.
Last Status
The display will return to the previous power
status.
WOL (Wake On LAN)
When on, the ViewBoard will turn ON automacally aer plugging
in a LAN cable when the screen is o.
Monitor ID
Assign a number to remote control the display by RS-232.
NOTE: The number range is: 1~98; 99 is reserved for “All
Displays”.
OSD Language
Set the preferred language for the ViewBoard.
Factory Reset
Reset all OSD Menu sengs to their default sengs.
Advanced Opons Reset
Reset the Advanced Opons sengs to their default sengs.