Do the following to adjust the screen image：
1. To display the Main Menu, press button [1].
NOTE：
All OnView menus and adjustment screens disappear automatically after about 30 seconds.
2. To select a control you want to adjust, press
▲ or ▼ to scroll up or down the Main Menu.
3. After the control is selected, press button [2].
4. To adjust the control, press the up
▲ or down ▼ buttons.
5. To save the adjustments and exit the menu, press button [1]
twice.
The following tips may help you optimize your display
：
˙
Adjust your computer’s graphic card so that it outputs a video signal 1920x1200@60Hz to the LCD display. (Look for
instructions on
“
changing the refresh rate
”
in your graphic card’s user guide.)
˙
If necessary, make small adjustments using H POSITION and V POSITION until the screen image is completely visible.
(The black border around the edge of the screen should barely touch the illuminated
“
active area
”
of the LCD display.)
ViewSonic Corporation Confidential
-
Do Not Copy VP231wb
9
To Next Page
Loading...
