Control Explanation
User Color — Individual adjustments for red (R), green (G), and blue (B).
1. To select color (R, G or B) press button [2].
2. To adjust selected color, press ▼ or ▲.
Important:
If you select RECALL from the Main Menu when the product is set to a Preset Timing
Mode, colors return to the 6500K factory preset.
Hue — adjust the video Hue level.
Saturation — increase or decrease color saturation to adjust the video saturation level.
Information displays the timing mode (video signal input) coming from the graphics card in your
computer. See your graphic card s user guide for instructions on changing the resolution and refresh rate
(vertical frequency).
Note: VESA 1920x1200@60Hz (recommended) means that the resolution is 1920x1200 and the refresh
rate is 60 Hertz.
Manual Image Adjust displays the Manual Image Adjust menu.
The Manual Image Adjust controls are explained below:
Horizontal Position moves the screen image left or right.
Vertical Position moves the screen image up or down.
Horizontal Size adjusts the width of the screen image.
Fine Tune sharpens focus by aligning the illuminated text and/or graphic characters.
Scaling adjusts the video input signal to the screen size other than 1600x1200 using the following
options.
1:1 adjusts the video signal so that the height and width of the picture are the same.
Fill all adjusts the video signal to fill the screen.
Fill Aspect Ratio maintains the correct video signal proportions for different resolutions.
ViewSonic Corporation Confidential
-
Do Not Copy VP231wb
11
To Next Page
Loading...
